|
ATTENTION: Windows 7 Users
Import/Export of ThinkDesign files are not supported.
|
Import Specifications
(Red: Enhanced Feature. Orange: Warnings.)
| System |
Version
|
Extension |
Description |
| CATIA |
V5R6 - R20 |
CATPart, CATProduct |
- File names with Japanese characters (2 byte characters) cannot be imported. |
| V4.1.x - 4.2.x |
model |
- Recommended import files |
EXP,
CATEXP |
- When importing exp files which have multiple model files, spGate imports all model files at the same time.
- Please work with single model 'exp' files.
|
| NX (UG) |
V11 - NX7.5 |
prt |
- File names with Japanese characters (2 byte characters) cannot be imported. |
Creo Elements
/Pro
(Pro/ENGINEER) |
V17 - Wildfire 5 |
prt, prt*
asm, asm* |
|
| ThinkDesign |
2005.1 - 2010.1 |
e3 |
- Requires installation of an authentic version of ThinkDesign 2005.1 or later.
- Not supported on Windows 7.
|
| Rhinoceros |
2.0 - 4.0 |
3dm |
|
Alias
(StudioTools) |
13.0 - 2011
|
wire |
- 32bit OS : Requires installation of an authentic version of StudioTools 13.0 or later.
- 64bit OS : Requires installation of an authentic version of AliasStudio 2009 (64bit) or later.
- File names with Japanese characters (2 byte characters) cannot be imported.
|
| Parasolid |
12.0 - 23.0 |
x_t, xmt_txt,
x_b, xmt_bin |
|
| ACIS |
- R21 |
sat |
|
| IGES |
- V5.3 |
igs, iges |
|
| STEP |
AP203, AP214 |
stp, step |
|
| spScan |
V2.6 - 2011.1 |
scand2 |
|
| DS |
- |
gateds, ds |
|
| STL |
- |
stl |
- Mesh can be modified in Polygon mode. |
| OBJ |
- |
obj |
- Mesh can be modified in Polygon mode. |
| SolidWorks |
98 - 2011 |
sldprt, sldasm |
| JT |
8.1, 9.0, 9.1 |
jt |
- These optional licenses must be purchased separately.
- Requires a dedicated dongle which cannot launch spGate older than V6.0.
|
Export Specifications
| System |
Version
|
Extension |
Description |
| CATIA |
V5R6 - R20 |
CATPart |
- File names with Japanese characters (2 byte characters) cannot be exported. |
| V4.1.9 |
model |
|
| NX (UG) |
x |
- |
- Not available. Please use Parasolid. |
Creo Elements
/Pro
(Pro/ENGINEER) |
x |
- |
- Not available. Please use IGES or STEP(recommended). |
| ThinkDesign |
2005.1 - 2010.1 |
e3 |
- Requires installation of an authentic version of ThinkDesign 2005.1 or later.
- Version of the exported file depends on the version of ThinkDesign installed.
- Not supported on Windows 7.
|
| Rhinoceros |
3.0 - 4.0 |
3dm |
|
Alias
(StudioTools) |
13.0 - 2011 |
wire |
- 32bit OS : Requires installation of an authentic version of StudioTools 13.0 or later.
- 64bit OS : Requires installation of an authentic version of AliasStudio 2009 (64bit) or later.
- Version of the exported file depends on the version of Alias (StudioTools) installed.
- File names with Japanese characters (2 byte characters) cannot be exported.
|
| Maya |
V8.0 |
ma |
|
| CAM-TOOL |
V6.2 |
gmd |
@ |
| Parasolid |
V12.0 - 20.0 |
x_t, x_b |
|
| ACIS |
V1.6, 1.7, 2.0, 2.1,
3.0 - 8.0,
10.0 - 21.0 |
sat |
|
| IGES |
V5.3 |
igs |
|
| STEP |
AP203, AP214 |
stp |
|
| spGauge |
2010.2 |
gaugeds, gaugedsz |
- spGauge files (spgaugeds/spgaugedsz) exported from spGate 2011.2 SP1 can not be opened in spGauge 2010.2 or newer.
- Be sure to install "DS-ClipServer" by running "ClipSvr\Setup.exe" in spGate 2011.2 SP1 installer when using DS-Clipboard.
- Use [File/Export] when translating data using PMI optional license. (PMI data cannot be translated via DS Clipboard)
- Login users without administrative right can not export spgaugeds.
|
| spScan |
V2.6 - 2011.1 |
scands2 |
|
| DS |
- |
gateds,ds |
|
| STL |
- |
stl |
- Binary export supported.
- Export precision can be specified. |
| OBJ |
- |
obj |
- Export precision can be specified. |
| JT |
8.1 |
jt |
- JT writer optional license must be purchased separately.
- Requires a dedicated dongle which cannot launch spGate V6.0 or older.
- File names with Japanese characters (2 byte characters) cannot be exported.
|
|
