Armonicos

閉じる

CLOSE

Armonicos

Alignment

Alignment Function for Point Cloud Data (Measured Mesh, CAE Mesh) by using spGauge.

Alignment for any products can be supported by a wide variety of Functions
( Press, Plastic, Cast, Forged, etc. )

Sectional Alignment after whole BestFit

Alignment

Usage Alignment between CAD Data & CAD Data, CAD Data & Point Cloud, Point Cloud & Point Cloud
Problem On general CAD/CAM/CAE/CAT system, Partial Alignment Function according to inspection area and method is not enough.
Effect After using BestFit, N-Points Alignment, 3-2-1 Alignment, Primitive Shape Alignment of basic method, by specifying area to align partially, partial inspection is possible.

Example) Section Curve Alignment, ZERO-touch, Surface Shape Alignment, 6 Axis Specifying, Long Hole Constraint etc.

ZERO-Touch Alignment

Alignment

Alignment

BestFit
Coordinate transformation is calculated to minimize summation of distance between each point in the specified area and the nearest CAD Surface, and is applied to Point Cloud.

Alignment

ZERO-Touch Alignment
Specified Point Cloud is aligned to touch the CAD surface.
It is possible to specify multiple areas.

Back to PRODUCT

pagetop